What is the standard batten size?
A true batten is 2-inches in width or smaller, but you can use larger widths by installing trim in place of a batten if you want a thicker appearance. They’re installed directly over the vertical panels to get the traditional look.
What size is batten wood?
What timber batten sizes are typically supplied? Timber battens compliant with BS 5534 typically come in two basic dimensions: 25x38mm and 25x50mm, with the ±3mm tolerance. These measurements should be taken with a reference moisture level of 20%.
How thick should timber battens be?
(These dimensions are supposed to be measured when at a “reference” moisture level of 20% but in reality, the 25mm thickness is the most important one: and this will barely alter, at the range of moisture levels which are encountered in batten production and on building sites – so 25mm minimum is what to look for in a …
How thick are cavity battens?
Timber cavity battens have good durability and stability, along with the strength of wood that provides a more stable substrate for application of fixings. Abodo recommends and supplies a castellated timber batten in both 45mm x 20mm and 45mm x 45mm for a 20mm and a 45mm cavity respectively.
How wide should battens be for board and batten?
Traditional board and batten uses wide boards and overlying narrow battens. For this style, the vertical boards will range in width from 6″ to 12″ with a 1/2″ to 1″ gap between the boards. The narrower battens that overlay the boards will range between 2″ and 4″.
What size is batten for board and batten?
Board and Batten Coverage Table
| Nominal Width (inches) | Dressed Width (inches) | Exposed Face Width (inches) |
|---|---|---|
| 6 | 5-9/16 | Varies with width of board selected |
| 8 | 7-3/8 | |
| 10 | 9-3/8 | |
| 12 | 11-3/8 |
What is batten gauge?
The gauge is the spacing the roofing battens are set at when fixing shingles and shakes (the space from the top of each batten). It is also the exposure, or the distance, from the butt or bottom of one shingle to the next course.
How far apart are cavity battens?
intermediate cavity batten between the studs; or • 75mm galvanised mesh; or • polypropylene tape at 300mm centres fixed horizontally and drawn taut No intermediate supports are required: when studs are spaced at 400mm centres; or • when rigid air barriers instead of building underlays are used.
What is a castellated batten?
A notched, or castellated cavity batten has a bevelled edge and evenly spaced notches that allow moisture drainage when used in a horizontal application. The battens are H3. 2 treated and kiln dried.
What size wood do you use for board and batten?
True board-and-batten is made with vertically installed wide boards and narrow battens fastened over the gaps between the boards. In appearance, board-and-batten siding can look rustic or modern, depending on how rough the lumber is and its finish. The most common arrangement uses 1×10 boards and 1×2 or 1×3 batten.
What are the dimensions of a timber roof batten?
Timber battens compliant with BS 5534 typically come in two basic dimensions: 25x38mm and 25x50mm, with the ±3mm tolerance. These measurements should be taken with a reference moisture level of 20%.
How big should a single lap timber batten be?
Clay and concrete tiles can be installed double or single lap, and this will play a part in determining the timber batten size. For double-lap clay and concrete tiles, the correct timber batten size is 38x25mm. Single lap installations should use 38x25mm batten for 450mm joist spans and 50x25mm batten for 600mm joist spans.
Are there different sizes of aluminium battens available?
Aluminium battens are literally available in hundreds of different sizes and shapes to suit a wide range of architectural and building designs. You can even create your own profile if it is not already available! Talk to our team about your required sizing or view our Technical Information page for more details.
How big should a JB red roof batten be?
Marley’s BS 5534-compliant JB Red timber battens are machine-graded and approved by the BBA. They are supplied in 25x38mm and 25x50mm sizes and can be provided in lengths of at least 3m, although lengths of 3.6m or more are typically supplied. When installed, they should be at least 1.2m long and span at least three rafters.