How wide is a 40-gallon gas water heater?
22″
Product Dimensions
| Type: | Short |
|---|---|
| Height w/Draft Hood: | 51 1/2″ |
| Diameter: | 22″ |
| Width: | 22″ |
| Depth: | 22″ |
What are the dimensions of a Rheem 40-gallon water heater?
Dimensions
| Product Depth (in.) | 21″ |
|---|---|
| Product Height (in.) | 49.25″ |
| Product Width (in.) | 21″ |
What are the dimensions of a short 40-gallon water heater?
Smith® 40-Gallon Short Natural Gas Water Heater 20″ D x 51-1/2″ H | HD Supply….About this item.
| Assembled Dimensions | |
|---|---|
| Product Depth | 20″ |
| Product Height | 51.5″ |
| Product Weight | 124 Lb |
| Product Width | 20″ |
What is the diameter of a hot water heater?
Tall water heaters typically range in height from 50 to 76-inches, and most have a diameter between 18 to 21-inches.
How do you measure the diameter of a water heater?
Determine the Size of Your Water Heater
- Look for a sticker on the side of your water heater. It should have the serial number and other information as well as the gallon capacity listed.
- Using a tape measure, measure the height of your water heater from its base to the top. Then measure the width (diameter).
What are dimensions of an AO Smith water heater?
A.O. Smith® 40-Gallon Medium Electric Water Heater 20 1/2″D x 50″H | HD Supply.
What is the cost to replace a 40-gallon water heater?
Water heater costs by gallon A standard 40-gallon water heater costs $330 to $1,500 for the unit alone, or $500 to $2,500 including installation labor. *Price for tank unit only, not including installation.
How is the height of a water heater measured?
What are the dimensions of your water heater? For the height, measure from floor to top of water heater. For the diameter, measure across the top of the water heater. New water heaters may have different dimensions than your current one, please talk with a sales associate before purchasing.
What is the height of a short water heater?
between 30 to 49 inches
Short water heaters vary between 30 to 49 inches and hold up to 50 gallons of water. The nickname for tall water heaters is “short boy.” Tall water heaters range from 50 to 76 inches and can hold up to 100 gallons of water.
How do you measure the diameter of a hot water heater?
Using a tape measure, measure the height of your water heater from its base to the top. Then measure the width (diameter). It is also helpful to measure from the floor to the ceiling of the space your water heater is in and note if you have any room on the sides or top of your water heater.
How do you size a hot water heater?
Measure the amount of water and multiply by 60 to get the gallons per minute (or liters per minute). The flow rate through the demand water heater should be at least 3.25 gallons (12.3 liters) per minute. To reduce flow rates, install low-flow water fixtures.
How many BTU for a 40 gallon water heater?
Recovery of gas-fired water heaters is a function of the BTU input and overall efficiency. Input ranges from about 32,000 on a 30-gallon unit to 88,000 on a 100-gallon tank. A common input is 34,000 BTUs on a 40-gallon tank and 36,000 BTUs on a 50-gallon tank.
What are the standard dimensions of a hot water heater?
Tall water heaters installed in homes range in height from 46 to about 60 inches. They have cylinder shapes that range in diameter from 18 to around 21 inches, and typically store anywhere from 30 to 100 gallons of water.
What is the price of a hot water heater?
The nationwide average cost of a water heater is $1,005, including installation. With such an array of options, shopping for a new water heater overwhelms some people. They have to pick a unit with the capacity to handle the volume of hot water used in the home and one that fits in the designated space in the house.
What is the size of a water heater?
Short water heaters vary between 30 to 49 inches and hold up to 50 gallons of water. Tall water heaters range from 50 to 76 inches and can hold up to 100 gallons of water.