How far apart should violin strings be?

How far apart should violin strings be?

The numbers below can vary and are meant as a general guideline. These measurements are for a full-size violin: The string distance on the bridge should be between 33 to 33.5 mm from the center of G-string to the center of E-string, with equal spacing between all strings.

What part keeps the strings up off the fingerboard?

Tuning pegs: These tapered wood pegs hold your strings in place and tighten/loosen the string to achieve the proper pitch. Nut: This flat piece of wood connects the peg box to the fingerboard, but also determines the violin’s “action”.

What is the radius of a violin fingerboard?

Examples

Model r w1
Traditional Classical guitars flat (no radius) Variable by maker
Martin acoustic guitars 16″ (406.4 mm) Variable by model
Gibson acoustic guitars 12″ (305 mm)
Full size (4/4) violin 42 mm 24 mm

How high should the bridge be on a violin?

The bridge should be around 33 mm high for a violin. This corresponds to a fingerboard projection of 27 mm. There is a relationship between how wide the bridge is and its height, and standard bridge models are designed to work best within this relationship.

What is it called when you pluck the strings of a violin?

Pizzicato (/ˌpɪtsɪˈkɑːtoʊ/, Italian: [pittsiˈkaːto]; translated as “pinched”, and sometimes roughly as “plucked”) is a playing technique that involves plucking the strings of a string instrument.

Why do fretboards have a radius?

Fingerboard radius is an important spec because it impacts playability. A smaller (more curved) radius is generally perceived as more comfortable for playing chords; a larger (less curved) radius is generally considered better for single-note playing and bending.

What makes a good violin bridge?

A good quality bridge should have a longer grain of wood on the front, or the side that faces the fingerboard. On the back, it should have a shorter grain. A trained luthier may be necessary when dealing with violin bridges, as the bridge is a very sensitive part of the violin.

Where do the strings go on a violin?

Violins have four strings, usually tuned to G, D, A, and E. The strings run from a tailpiece attached to the base, across a wooden bridge, continue towards the neck of the instrument running parallel to the fingerboard, and connect to the pegbox located at the very top of the violin.

How tall should a full size violin be?

These violins are played by tall teens or adults, and measure 23 – 23 ½ inches in total length. They fit arm lengths of 23 inches or larger. As a general rule, most students and adults that are at least 5 feet tall can play a full size violin.

Pizzicato is the Italian word for “plucked.” To play pizzicato on a stringed instrument (such as the violin, viola, cello, or double bass) means to make the notes sound by plucking the strings with the fingers rather than by using the bow.

What are the strings of a violin called?

The violin has four strings From high to low, the strings on the violin are E, A, D, and G. They are made from a variety of materials including catgut (sheep intestine), nylon, and steel.

What is a guitar fingerboard radius?

Fingerboard radius is the curvature of the fingerboard across the neck, from the lowest string to the highest string, and just like the radius of a circle, it can be described by a number. For example, if you’ve ever seen the specs for an electric guitar neck, you might have read 7.25″ as the radius.

How tall should violin strings be on the fingerboard?

If your strings are too high, it will hurt more, and for longer. Standard height for strings at the end of the fingerboard (the part closest to the bridge), is 3.5 for the E string, and 5.5 for the G string. If your strings are a millimeter off from this, the issue is probably easy to ignore.

How are the strings held on a violin?

If the fingerboard was flat, the string would press against the entire fingerboard. Since the fingerboard is at an angle, the strings have to be held at the correct height by a precisely measured and cut bridge. In this photo, you can see the angle of the fingerboard and hight of the bridge.

Why is the top of the violin fingerboard curved?

The top surface of the fingerboard is curved if you look across it and there is a slight dish to the surface when looking along it. These curves are necessary to help the player stop a string and also to prevent a string buzzing, this happens when the vibrating part of the string touches the fingerboard when it shouldn’t.

Where do you place your second finger on a violin?

Adjust your second finger (middle finger) on the G string until the tuner reads B and then place your tape down. When the second finger is placed on the second finger tape on each string, the tuner should read B on the G string, F # on the D string, C # on the A string and G # on the E string.