How do I turn on my Samsung Crystal Surround Air Track?

2020-02-29 editor Popular guidelines 0

How do I turn on my Samsung Crystal Surround Air Track?

Use the dedicated USB cable to connect external USB devices to the unit. POWer BUttOn Turns the Crystal Surround Air Track on and off. fUnctiOn BUttOn Selects the D.IN, AUX, HDMI, BT, TV, USB input. – While the unit is powered, pressing the ( ) button for more than 3 seconds sets the button to act as MUte button.

Why does my Samsung soundbar keep disconnecting?

The sound on your wireless subwoofer can drop out if there is interference or a physical obstruction between the soundbar and subwoofer. You can try checking the firmware version, resetting, and reconnecting the subwoofer.

How do I adjust my Samsung sound bar?

Use the TV remote to navigate to Settings, select Sound, and then select Sound Output on your Samsung TV. Select your Samsung soundbar, and then select Close. Now you can use your TV remote to adjust volume and mute the soundbar. The soundbar should also turn on and off with the TV.

Why is my Samsung subwoofer not working?

Check your wall outlet. Unplug the subwoofer and plug it back in. It should have a standby light if it’s receiving power. If it’s not, test the outlet with something else, like a lamp. If the outlet has no power, the issue is with the outlet (although hopefully it’s something simple, like a tripped circuit).

How do I pair my Samsung Air Track Bluetooth?

Step 1 of 6

  1. Press the Source button on the soundbar or remote until BT appears on the display.
  2. Set the soundbar to BT mode.
  3. Press and hold the Source button on the soundbar or remote.
  4. Continue holding until BT PAIRING appears on the display.
  5. Select the Bluetooth® device you want to connect.

How do I reset my Samsung subwoofer soundbar?

Use a small pointed object to press the ID SET button on the back of the subwoofer. Continue holding until STANDBY turns off and LINK (Blue LED) blinks quickly. While the soundbar is turned off, press and hold Mute on the remote control.

How do I get my Samsung Soundbar to stay on HDMI?

If you have the soundbar connected with an HDMI cable to the Samsung TV, Anynet+ will turn the soundbar on automatically….Using Anynet+ and ARC

  1. Connect an HDMI cable from the HDMI OUT port on your soundbar to your TV’s HDMI (ARC) port.
  2. Set the soundbar to D.IN mode by pressing Source on the remote or soundbar.

How do I reset my Samsung sound bar?

Steps to Reset your Samsung Soundbar

  1. Turn on the soundbar by pressing the switch on button.
  2. Hold the power button either on the remote control or soundbar control panel.
  3. Continue to press down the power button until you see the ‘INIT OK’ message on the display panel.
  4. Wait for the soundbar restart and that’s all.

How can I make my soundbar sound better?

What to Do to Make Your Soundbar Louder?

  1. Choose a Soundbar with Adequate Speaker Channels.
  2. Adjust the Acoustics in Your Media Room.
  3. Ensure the TV Settings are Correctly Programmed.
  4. Add More Speakers to Your Sound System.