How do I log into my buffalo AirStation router?

2020-10-01 editor Trending 0

How do I log into my buffalo AirStation router?

How do I access the configuration interface of the AirStation?

  1. Connect the PC to the AirStation.
  2. Launch a web browser.
  3. Enter the AirStation’s IP address in the address field, then press the [Enter] key.
  4. Logging in : Enter the username and password, then click [OK].

How do I reset my Buffalo AirStation password?

Forgotten password / Reset for Wireless devices

  1. Look for the INIT or Reset button on the device. Press and hold for about 10 seconds (The only exception is the WBMR-G54, here press the reset button for about 20 seconds).
  2. If the red diag light starts flashing release the button. Wait until the router is restarted. (

How do I login to Buffalo?

Buffalo Router Login Open your web browser of choice and type IP address of your Buffalo router in the address bar. You can find the ip address on the back of your router. Now enter the default username and password of your router by accessing the admin panel.

How do I reset my Buffalo AirStation router?

How to Hard Reset a Buffalo Router

  1. Press and hold the reset button at the back of the Buffalo router for 30 seconds.
  2. Disconnect the power from the router while continuing to hold down the reset button.
  3. Reconnect the power after five seconds.
  4. Continue to hold the reset button for 30 seconds.

What is Buffalo AirStation default password?

The default username is “admin” and the default password is “password”. Click the “Wireless” tile. Enter a new SSID for the 11n and/or the 11ac network, then click Apply.

What is the IP address for Buffalo AirStation?

192.168.11.1
By default, your AirStation is accessible on your local network at the IP address 192.168. 11.1 with subnet mask 255.255. 255.0.

How do I reset my Buffalo AirStation WZR 1750DHP?

To reset the Buffalo WZR-1750DHP to its default settings, you have to do the following steps:

  1. Switch on router.
  2. For at least 3 seconds, press the Reset button.
  3. Device is automatically restarted.
  4. Router has been reset to factory settings.

What is Buffalo AirStation?

Buffalo AirStation is the name given to a series of wireless LAN equipment sold by Buffalo Technology.

How do I find my buffalo IP address?

Log in to Settings. From Settings, click the “Advanced Settings” tile. Click the “Network” tab on the left. Click on the widget to the right of “IP Address”.

How do I change my Buffalo router settings?

Changing the SSID (Network Name) on a Buffalo AirStation

  1. Connect the AirStation to the PC and power both devices on.
  2. Launch a web browser and enter the AirStation’s IP address into the address bar.
  3. Log in to Settings.
  4. Click the “Wireless” tile.
  5. Enter a new SSID for the 11n and/or the 11ac network, then click Apply.

How do you set up Buffalo AOSS?

How to: Start AOSS on wireless router?

  1. Hold AOSS button down (approximately 1 Sec) until security LED starts blinking. Once the security setup is successfully completed , security LED will turn to steady ON.
  2. Hold AOSS/WPS button down (approximately 3 Sec) until security LED starts blinking.