How do I fix Verifone connection error?

2020-08-01 editor Users' questions 0

How do I fix Verifone connection error?

VeriFone VX520 – How To Repair IP/ Ethernet Connection

  1. Press the * key.
  2. Press “F2” for CommServer.
  3. Press “Reprint” under the Wrench and the Hammer.
  4. Press “F4” for REPAIR.
  5. Prompted “Repairing Connection Operation May Take Up To 1 Minute Please Wait…”
  6. If Prompted, “Connection Repair Failed, …”

How do I fix Verifone VX520 error?

Follow these steps to reboot your terminal.

  1. Unplug the phone cord from the terminal.
  2. Unplug the power cord from the terminal.
  3. Wait for 30 seconds.
  4. Plug in the power cord.
  5. Wait until the Commserver screen appears.
  6. Plug in the phone line.
  7. Try again to process a transaction.

What does Comm error mean on a credit card machine?

communication error
I. “Comm Error” – Stands for communication error and is by far the most common issue that you will face. The bank authorizes these funds and sends a signal back to the terminal to say “Approved” or “Declined.” If a communication error happens on the way to the bank or on the way back, it will say “Comm Error.”

What is the password for VeriFone vx520?

If your are using the default password, it is 1 alpha alpha 66831.

How do I reset my PIN pad?

Power cycle the iPP320 PIN Pad. On the PIN Pad, hold down the yellow key and press the punctuation key at the same time. The iPP320 PIN Pad will beep and restart.

How do you reset a Verifone keypad?

Power cycle the device:

  1. Remove battery from the back and then replace.
  2. Press and hold the green Enter key to restart the terminal.

What is a comm error?

“Comm. Error” will appear on your machine’s display if the machine experienced a communication error while sending or receiving a fax. This type of error is generally caused by interference on the telephone line, an incorrect telephone line connection, or another device on the line causing poor line quality.

What are the common error codes on Verifone terminals?

Common error codes include the following: 1 COMM ERR 2 TCPIP 3 LINE BUSY 4 LINE CLOSE FAIL 5 NO HOST RESPONSE 6 DIAL PRIMARY 7 NO LINE

Where is the Ethernet port on a Verifone terminal?

Be sure to use the Ethernet port that is closest to the power jack on your Verifone terminal device. Once you fix the cable and get it correctly placed, fully reboot the device by removing the power and connecting the power back up.

What are the error codes on Verifone VX 520?

Troubleshoot VeriFone VX 520 terminals. Your VX 520 terminal may display a communication error code when a transaction fails to process. Common error codes include the following: COMM ERR; TCPIP; LINE BUSY; LINE CLOSE FAIL; NO HOST RESPONSE; DIAL PRIMARY; NO LINE

How to enter system mode in Verifone VX 805?

Press F2 and F4 to enter system mode. Enter the password (1, ALPHA, ALPHA, 6, 6, 8, 3, 1) and then hit “Enter”. The Alpha key is the black key located directly above the 2 key. Enter is the Green key. Press 2 for “Edit Parameters”.