Can I sanitize my air ducts?

2020-08-31 editor Other 0

Can I sanitize my air ducts?

To sanitize and disinfect your air ducts, our techs use an EPA-registered disinfectant solution that’s called Sporicidin. This is fragrance-free, low-toxic treatment that’s presently used in hospitals, medical offices and other healthcare facility environments.

How can I disinfect my air ducts myself?

Step-by-Step duct cleaning

  1. Remove the screws from air duct covers and return-air grill plates.
  2. Cover up your supply vents (those vents that supply heat or air to the rooms) with paper towels.
  3. Set your thermostat to the “fan on” position.
  4. Loosen dust in ducts.
  5. Clean supply registers.
  6. Clean the return registers.

What is oxine sanitizer?

This antimicrobial sanitizer is a highly refined blend of oxychloro species containing purified sodium chlorite. When activated, chlorine dioxide is produced, greatly enhancing OXINE’s antimicrobial activity. With applications in the food processing and water treatment industries.

What is the active ingredient in Oxine?

Chlorine Dioxide
Oxine AH Active Ingredient: Chlorine Dioxide 2%. Citric Acid, granular – 99% purity.

Do I need my ducts sanitized?

EPA does not recommend that the air ducts be cleaned routinely, but only as needed. EPA does, however, recommend that if you have a fuel burning furnace, stove or fireplace, they be inspected for proper functioning and serviced before each heating season to protect against carbon monoxide poisoning.

How do you sanitize ductwork?

How to Sanitize Ductwork Yourself

  1. Protect Yourself. First, to avoid inhaling dust or debris put on a mask and safety goggles.
  2. Clean With a Vacuum. To clean the ducts, vacuum all the dust, dirt, and other particles.
  3. Close All Vents But One.
  4. Run the Hose.
  5. Clean Up.
  6. Benefits of Residential Air Duct Sanitizing.

Is oxine safe for humans?

Important note: Some types of uses (such as directly soaking food or adding to drinking water) of activated Oxine should be limited to low concentrations, such as 5-15 ppm. Numerous scientific studies have demonstrated that even activated chlorine dioxide is safe to inhale when present in the air at very low levels.

How do you use oxine disinfectant?

Proper Use of Oxine Set adjustment on sprayer to deliver 1.0 fluid ounce of Oxine® AH per gallon of water (1:128) for control of bacteria, mold and fungi. Use a setting of 3.0 fluid ounce of Oxine® AH per gallon of water (1:42) for control of virus and spores.

Is oxine a bleach?

Unlike bleach, chlorine dioxide does not create cancer-causing byproducts. Oxine is VERY SUPERIOR TO BLEACH for cleaning surfaces that have biofilm or are porous. With a bleach solution, bleach’s power can get used up on a porous surface area (such as wood) or where there is organic matter.

How safe is oxine?

Oxine® is toxic to fish and aquatic organisms. Do not discharge effluent containing this product into lakes, rivers or streams. Do not discharge effluent containing this product to sewer systems without first notifying the sewage treatment plant. Oxine® does not bio-accumulate and is biodegradable.

Is it OK to use Oxine in air ducts?

OXINE® is among a handful of products that are allowed by the US EPA for the application in air ducts and ventilation systems. The approval, is for limited use*. The limitation in the application precludes disinfection claims.

How to apply oxine AD in a respirator?

OXINE-AD® should be applied by the applicator wearing a NIOSH-MSHA approved respirator with an Organic Vapor/Acid Gas Cartridge. Secure proper respiratory and eye wear protection prior to activation. 1. Pour 3.25 fl. oz. of OXINE® concentrate into a suitable mixing container. 2. Add 10 grams of OXINE® activator crystals to the OXINE® concentrate.

Which is the best air duct sanitizer to use?

OXINE® is approved for use in air ducts as a static agent. Static agents are those that prevent microorganisms from replicating are the best alternative to a sanitizer. OXINE® is the most widely used static agent in HVAC along with its companion product EnviroCON.

What is the safety rating of Oxine AD?

One of OXINE-AD’s trademarks qualities is its safety rating by the EPA due to its low toxicity. Rated as a category III, OXINE-AD® does not leave an active chemical residue, and quickly degrades to simple table salt.

https://www.youtube.com/watch?v=fSMlsJMAaJg