How do I update my particle board desk?
To fix water-damaged sections of particleboard furniture, remove the damaged areas using a sharp razor, then fill the space with wood filler (see above) and sand smooth. If the damage is extensive, remove the damaged areas and replace with a new piece of particleboard.
What can I use to cover particle board?
Paint, roll or spray a bonding agent on the particle board to obtain an even coat. For best results, use a contact cement. Contact cement is brushed onto both surfaces that will be bonded: the particle board and the back of the contact paper.
Can you stain a particle board desk?
Laminate is one way to make particle board durable and decorative. Staining allows you to give your laminated piece a makeover. With proper application, stain can revitalize the wood and turn an old piece of laminated particle board into something new.
How do you make particle board look good?
The primer is the key to a good paint finish on particleboard. A water-based primer such as latex causes particleboard to swell, so it shouldn’t be used. A solvent-based primer such as oil or lacquer is required to prep the surface for paint. Latex, oil or lacquer paints can be used once the primer dries.
How do you refurbish a particle board dresser?
How to Refurbish Particle Board Furniture
- Clean the furniture with a damp cloth and soap.
- Sand down any rough areas.
- Apply wood filler to cracks or scratches, then sand smooth again.
- Use a paint primer to seal the surface of the furniture before painting it (optional)
How do I get a smooth finish on particle board?
If the project will be finished with paint or a similar opaque finish, one of the quickest and easiest ways to smooth over and hide the raw edges is to fill in the porous end grain with a vinyl- or acrylic-base spackling compound or with a wood putty that comes in powdered form and must be mixed with water to make it …
How do you cover exposed particle board?
It is nailed on over the corner joint so it actually wraps around and covers the whole corner. This not only covers up any gaps or other irregularities in the joint, it is also effective in hiding splintered and rough edges.
What kind of paint do you use on particle board?
Oil or lacquer-based paints will work best for painting particle boards. However, if you have primed the wood with an oil-based primer, you should be able to use water-based paint without the particle board absorbing any water. A variety of different colored paints should be available at your local hardware store.
Can you stain finished particle board?
There’s no rule against making tables and cabinets with exposed particleboard, though — although its color when unfinished is somewhat unattractive. You can change that with a stain. Particleboard is very porous, so it’s important to seal it first to allow the stain to soak in evenly.
What paint works best on particle board?
What’s the best way to refurbish a particle board?
Apply a thin layer of contact cement to both the particle board surface and the bottom surface of the veneer. Use a small stick or a pencil to keep the surfaces apart for 15 minutes or so, until the glue is no longer shiny. Press the plastic veneer down onto the particle board core, using a roller or block of wood.
Can You repaint a laminated particleboard desk?
While a laminated particleboard desk is designed to be durable, it may be lacking a little in the decor department, especially if the current finish is more fitting of a style from decades gone-by. Rather than replacing a desk that is solidly built, repaint it to give it a more quality, high-end appearance.
Who is the best contractor for particleboard furniture?
Kelly Bacon is a licensed general contractor with almost 50 years experience in construction, home building and remodeling, and commercial building. Particleboard furniture is a cheap option when you need to decorate your home on a tight budget, but this type of furniture does not always withstand the test of time.
Can you use laminate flooring on particleboard furniture?
Press the plastic veneer down onto the particleboard core, using a roller or block of wood. The veneer should bond firmly. Some particleboard furniture is not faced with laminate, but instead is already painted. With these pieces, long exposure to water can create bubbles and permanent stains on the surface.