What is SJE Rhombus tank alert?
The Tank Alert® I indoor alarm system provides audio/visual warning of potential threatening liquid level conditions in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural and other non-potable water applications. If an alarm condition occurs, the horn sounds and alarm light activates.
How does SJE Rhombus tank Alert work?
Tank Alert® alarms provide audio/visual warning of potential threatening liquid level conditions. The horn can be turned off, but the alarm beacon remains on until the condition is remedied. Once the condition is cleared the alarm will automatically reset.
Why is my septic tank alarm going off?
Septic tanks typically come with alarms for a good reason. The septic alarms are meant to go off when the water level in your septic system’s pump tank is either too high or too low because either condition can cause damage to the system and should be prevented.
How does tank alert XT work?
The Tank Alert® XT indoor/outdoor alarm can serve as a high or low level alarm depending on the float switch model used. The alarm horn sounds and the red beacon illuminates when a potentially threatening liquid level condition occurs. A “power on” light on the switch indicates power to the alarm panel.
What does SJE Rhombus do?
SJE Rhombus has been a global leader in the water & wastewater industry for over 40 years. We create products for a range of applications, including residential, commercial, municipal, industrial and agricultural. Our products are engineered and tested to be reliable, easy-to-use and high quality.
Can heavy rain affect septic systems?
It is common to have a septic back up after or even during a heavy rain. Significant rainfall can quickly flood the ground around the soil absorption area (drainfield) leaving it saturated, making it impossible for water to flow out of your septic system.
How do I reset my septic alarm?
If the alarm happens to be going off, the best thing to do is to push the red button or switch on the alarm box. This will turn off the alarm. There should be a red light and a green light located somewhere on the alarm box. The green light means that the alarm has power and should always be on.
How do you fix a septic tank that backs up when it rains?
After a major rain event, the only way to relieve pressure on the system is by using it less. If possible, reduce or eliminate water going down the drains until the drainfield dries out. An emergency septic service cleaning can provide temporary relief, but this is often a futile exercise in battling mother nature.
How does tank Alert work?
A tank alert alarm is an electronic system that monitors liquid levels in sump pump basins, holding tanks, sewage and other non-potable water systems. The alarm elicits a warning horn when it detects threatening liquid levels. The alarm is also used in homes with septic tanks and includes indoor and outdoor models.
What does SJE stand for?
SJE
| Acronym | Definition |
|---|---|
| SJE | Social Justice Education |
| SJE | Sompo Japan Insurance Company of Europe Limited (Sompo Japan Insurance, Inc.) |
| SJE | St-Jean-Eudes (Québec, Canada school) |
| SJE | Sciences Juridiques et Economiques (French: Legal Science and Economics) |
How often should a septic tank be emptied NZ?
every 3-5 years
Tanks generally need pumping (cleaning out) every 3-5 years to remove sludge and sediment.
Can a sje rhombus tank alarm be used?
Tank alarms are great for homes, rental properties, and seasonal homes to help prevent costly water damage. Avoid hazardous and expensive clean up of sewage and wastewater by using SJE Rhombus tank alarms for all your water level monitoring needs.
How does the tank alert XT alarm work?
The Tank Alert® XT indoor/outdoor alarm system provides audio/visual warning of potential threatening liquid level conditions in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural and other non-potable water applications. If an alarm condition occurs, the horn sounds and red alarm beacon activates.
How to troubleshoot 230 VAC tank alert I?
The 230 VAC Tank Alert® I will not operate on 120 VAC. In the absence of a label check the voltage with a volt/ohm meter. Disconnect alarm from power source. Place the meter leads on flat plug terminals. If the plug has been removed, place meter leads on bare wires at the end of the power cord.