What is plastipak syringe?
BD Plastipak™ syringe is a precision drug delivery device* that is an essential part of your daily patient care toolkit, which you can use across a range of critical applications and departments.
How do you attach a needle to a luer lock syringe?
Luer lock syringes for detachable needles work by having a twist fit thread around the tip of the syringe for the needle to screw down onto form a more permanent seal. ALL detachable needles have two small tabs on the outside that fit into this thread, so that they can be fitted to luer lock syringes.
What size tubing fits on a syringe?
PLASTIC TUBING 3mm and 4mm can be used with syringes, 3mm provides a very tight fit, 4mm a good fit but may require tape for heavy use.
What is the difference between luer lock and luer slip?
The difference is that the Luer Lock syringe allows a needle to be twisted onto the tip and then locked in place. luer Slip syringes allow a needle to be pushed on to the end of the tip if a needle is required, all our Leur Slip syringes accept needles in this way.
What are BD Plastipak syringes made of?
polypropylene
BD Plastipak Luer Lock disposable syringes in polypropylene for general lab applications. These syringes can also be used with syringe pumps in any microfluidic system.
What is Luer lock connector?
“Luer-Lock” style connectors are often generically referred to as “Luer lock”, and “Luer-slip” style connectors may be generically referred to as “slip tip”. Luer lock fittings are securely joined by means of a tabbed hub on the female fitting which screws into threads in a sleeve on the male fitting.
How do you use a Luer lock needle?
Attach the BD™ Blunt Fill or Filter Needle to any standard luer-lock hypodermic syringe. Twist until firmly seated. Pull the red needle shield straight off. Detach needle from syringe and immediately discard into an approved sharps collector after single use.
What is a Luer lock connector?
How do you attach a tube to a syringe?
Just plug a needle of your choice on the Luer end of the syringe (conversion table between gauge sizes and inner / outer diameter). Then, just insert your tubing on the needle. That’s it! Tip: Always choose a needle with a larger outer diameter than the inner diameter of your tubing to avoid leakages.
Can you use Luer lock syringe?
Luer slip syringes are used for IM and subcutaneous injections. Luer lock syringe are recommended in certain circumstances for IV therapy.
How are BD Plastipak Luer lock syringes used?
BD Plastipak Luer Lock disposable syringes in polypropylene for general lab applications. These syringes can also be used with syringe pumps in any microfluidic system. 3 mL, 5 mL, 10 mL, 20 mL, 30 mL or 50 mL syringes available in bulk packs. BD Plastipak Luer Lock disposable syringes in polypropylene for general lab applications.
What can a Plastipak syringe be used for?
1.1 General BD Plastipak™ syringes are used for general purpose injection and aspiration of fluids from vials, ampoules and parts of the body below the surface of the skin. Perfusion syringes, 50ml syringes, are designed for short term use in syringe pumps (active IIa devices) for the administration of pharmaceuticals.
Is the BD Plastipak 3 piece syringe ISO 7886?
Complies with international standards (ISO 7886-1) for volumetric accuracy and leak-tight performance BD Plastipak ™ syringe is a precision drug delivery device* that is an essential part of your daily patient care toolkit, which you can use across a range of critical applications and departments.
What kind of tip do you use for a syringe?
Luer Lock Tip Generally used for injections requiring a secure connection of the syringe to another device. Concentric Luer Slip Tip The concentric luer slip tip provides a friction-fit connection that requires you to push and twist the syringe tip into the needle hub.