What is mule tape used for?
Pull tape, also called mule tape, is used for the routing of wires through walls and electrical conduits. It’s made of polyester or yarn fibers that are flattened into a ribbon-like shape to disperse pull load. This tool has useful features, such as measurement markings, that facilitate the routing process.
What is detectable mule tape?
Detectable MULETAPE Woven Polyester Mule Tape 3000′ Flat, woven, polyester tape used for installing fiber optic, copper, and coaxial cables in underground conduit. Insulated metallic conductor enables location of all-dielectric cables and empty conduit. Lubricated for easy pulling and reduced friction.
What is bull line used for?
Bull Line Pull Tape – Accessories | Dura-Line. Dura-Line manufactures standard High Density Polyethylene (HDPE) conduits for standard installation applications such as standard underground, as innerducts in existing conduits, or corrugated products to use in congested areas.
What is Bull tape?
Description. Bull-Line Polyester Tape WP12 3000ft. A single pull tape eliminates the additional labor required for string, rope or winch line combinations. All Bull-Line Tape is manufactured with Stiff-Tape lubrication coating, and has footage markings on it that helps better gauge the overall footage of the pull.
Can you use mule tape on a tugger?
The compact Greenlee Versi-Tugger 1,000-lb Puller is an excellent tool for all those wire pulling jobs of 1,000 pounds or less. It easily spools mule tape and wire and easily capstans rope. This is also a very versatile tool.
How much weight does mule tape hold?
MULETAPE is offered in tensile strengths varying from 400 to 6000 lbs. Pulling forces vary depending on fill ratio, terrain and underground architecture; actual field conditions should be considered.
How strong is mule tape?
What type of rope do arborists use?
General Purpose Polyester/Nylon Rope Polyester and nylon ropes have strong fibers that are so durable that it can protect itself from many different chemicals and UV. Rigging and climbing ropes made from these durable materials, make these inexpensive ropes worthwhile for an Arborist.
Is MULETAPE UV resistant?
Mule tape is interesting stuff and I use a bit here and there, but it is made for pulling cables through buried conduit and has no UV protection. I would not use it for any critical application where someone might be hurt if the mule tape should break.
How much weight does MULETAPE hold?
What is the strongest MULETAPE?
Measuring Tape, Pull Line, Diameter: 3/4″, Length: 1,000 ft, Tensile Strength: 2,500 lbs.
What kind of wire for Bull Line locatable tape?
Bull-Line Locatable Tape is offered with a tracer wire for signal locating. The tracer wire is woven into either Bull-Line Polyester or Aramid Pull Tape and provides a corrosion resistance conductor that is easily spliced in the field.
Where to place tracer wire in a pipe?
Install tracer wire along the pipe above or to the side of the pipe. Contact with the pipe is allowed but shall be minimized. Recommended 2” – 6” separation. Install tracer wire as a single continuous wire. Splicing of wire, if necessary, shall be done in such a way to produce an electrically and mechanically sound joint.
When to use home flex 100 ft tracer wire?
Receive an email if this item is back in stock. The HOME-FLEX 100 ft. Tracer Wire is used when burying underground yellow poly gas pipe. Allows for detection of the underground gas pipe. Bury along-side pipe in the trench and up the risers.
Do you need a tracer wire for a gas line?
However, most gas distribution lines are polyethylene (PE) and do not carry a current (non-energized). Therefore, the line will not be locatable by itself unless the tracer wire is buried at the time of the pipeline installation. Tracer wire is used to locate gas, water, sewer, electrical, and telecommunication lines. A new standard is emerging.